Welltech SPCI2S Intel NetStructure SS7 Boards Manuel d'utilisateur télécharger pdf (Page 13)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 13

The -f option is used to force loading of the driver even if it was built using a

different minor kernel version.

The major device number can be entered as hex or decimal numbers, hex values

use a 0x prefix (e.g. 10 can specified as 10 or 0x0a).

For example:

insmod -f sptpci.o majno=40

<majno> - Major device number

The ’majno’ option is used to specify the major device number.

2.2.3 Verifying device driver loading

When the device driver is loaded it will output status messages to the system log.

The system log can be displayed using the following command:

dmesg | more

An example of messages written to the system log by the driver is:

SeptelcP/SeptelPCI V0.03

Bus mastering enabled

Found 2 boards

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 106 107

Pas de commentaire

Welltech SPCI2S Intel NetStructure SS7 Boards Manuel d'utilisateur Page 13